Categories

DIYmall Green Light Optical Fingerprint Reader Sensor Module for Arduino Mega2560 UNO R3 For raspberry pi 3 By diy FZ1035G

100 % of buyers enjoyed this product!
In stock
Best Offer
45 days Money back
45 days Money back Returns accepted if product not as described, buyer pays return shipping; or keep the product & agree refund with seller.
On-time Delivery
On-time Delivery
Guarantees: On-time Delivery 60 days

Share:

Green Light Optical Fingerprint Reader Sensor Module for Arduino Mega2560 UNO R3

Features:
Make adding fingerprint detection and verification super simple.
Typically used in safes­-there’s a high powered DSP chip that does the image rendering, calculation, feature-finding and searching.
Connect to any microcontroller or system with TTL serial, and send packets of data to take photos, detect prints, hash and search.
You can also enroll new fingers directly – up to 162 finger prints can be stored in the onboard FLASH memory.
There’s a red LED in the lens that lights up during a photo so you know it is working.

Specifications:
Supply voltage: DC 3.8-7.0V
Operating Current: <65mA
Peak current: <95mA
Fingerprint image time: <1.0 seconds
Window area: 14.5*19.4 mm
Signature File: 256 bytes
Template files: 512 bytes
Storage capacity: 1000
False Accept Rate (FAR): <0.001% (security level 3)
False Reject Rate (FRR): <1.0% (security level 3)
Search time: <1.0 seconds (1: 500 average)
PC interface: UART (TTL logic level)
Baud rate (UART): (9600*N)bps (N=1~12, N default 6, equal 57600bps)
Working environment: Temperature: -20 °C to 50 °C
Relative Humidity: 40% RH to 85% RH (non-condensing)
Storage Environment: Temperature: -40 °C to 85 °C
Relative humidity: <85% H (no condensation)
Lighting: Long light/Flashing
Dimensions (L* W* H): 56*20*20.5mm

Document link http://www.diymalls.com/files/FZ1035G.zip

Note:
There are basically two requirements for using the optical fingerprint sensor. First is you’ll need to enroll fingerprints – that means assigning ID #’s to each print so you can query them later. Once you’ve enrolled all your prints, you can easily ‘search’ the sensor, asking it to identify which ID (if any) is currently being photographed.
You can enroll by using the windows software (easiest and neat because it shows you the photograph of the print) or with the Arduino sketch (good for when you don’t have a windows machine handy or for on-the-road enrolling)

Package includes:
1 x Fingerprint reader module
1 x Cable

Average Star Rating:
0 out of 5 (0 Ratings)
Name Rating Feedback
Shipping Company Shipping Cost Estimated Delivery Time
DHL 3 - 7 days
UPS Expedited 3 - 7 days
EMS 5 - 14 days
Post Air Mail Free Shipping 15 - 45 days
Return Policy If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.

N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
Seller Service On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).
Best Offer